High-Definition 5MP camera for Raspberry Pi
This interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor.
The camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
This CSI cable in the box is dedicated for Raspberry Pi 3B+/3/2.
To connect with a Raspberry Pi Zero/ZeroW, you need to purchase a compatible cable at the link below:
Shot: 1/4 5M
FOV: 65 degree
Sensor type: OmniVision OV5647 Color CMOS QSXGA (5-megapixel)
Sensor size: 3.67 x 2.74 mm (1/4″ format)
Pixel Count: 2592 x 1944
Pixel Size: 1.4 x 1.4 um
Lens: f=3.6 mm, f/2.9
Angle of View: 54 x 41 degrees
Field of View: 2.0 x 1.33 m at 2 m
Full-frame SLR lens equivalent: 35 mm
Fixed Focus: 1 m to infinity
Video: 1080p at 30 fps with codec H.264 (AVC)
Up to 90 fps Video at VGA
Board size: 25 x 24 mm (not including flex cable)
1 X 5MP Raspberry Pi Camera
1 X 15cm CSI Cable
How to use?
1.Please ensure the Raspberry Pi system is the newer version and the camera function have been enabled . Or type in this the command: sudo raspi – config to enable it as the picture below:
3. Hit the “Finish” , the system will restart automatically.
4. Now the Raspberry pi camera is ready for use.
To take a photo, just simply type in this command : raspistill
raspistill -t 2000 -o 1.jpg
-t: ( timeout : Time (in ms), 2000 means two seconds).
-o 1.jpg (1.jpg is the output file name)